Pulp and Paper Online Downloads

Material Safety Datasheet: Pre-Krete G-8

7/2/2008 3:14:00 AM

Pocono Fabricators Pre-Krete G-8 is an aluminous hydraulic cement designed to provide effective corrosion and/or abrasion resistance against various acids and chemicals commonly found in industry. It is recommended that the specific application be discussed with the factory or an authorized Pre-Krete representative prior to the installation.

Technical Datasheet: Pre-Krete G-8

7/2/2008 3:14:00 AM

Pocono Fabricators Pre-Krete G-8 was developed in 1961. It is an aluminous hydraulic cement designed to provide effective corrosion and/or abrasion resistance against various acids and chemicals commonly found in industry.

Material Safety Datasheet: Pre-Krete G-8 Modified Fine

7/2/2008 3:14:00 AM

Pre-Krete G-8 is an aluminous hydraulic cement designed to provide effective corrosion and/or abrasion resistance against various acids and chemicals commonly found in industry. Wet cement, especially as an ingredient in plastic (unhardened) concrete, mortar, or slurries can dry the skin and cause alkali burns.

Technical Datasheet: Pre-Krete FS-16

7/2/2008 3:09:00 AM

Pocono Fabricators' Pre-Krete FS-16 is a non-shrinking, fast-setting, hydraulic calcium aluminate cement containing 40% hydraulic binder, 40% silica and 20% inert aggregates. FS-16 is an extremely versatile product with many uses in all industries. It is primarily used as a repair material for concrete where high compressive strengths are required in a limited amount of time. It is also used to set and anchor machinery or equipment.

Material Safety Datasheet: Pre-Krete FS-16

7/2/2008 3:09:00 AM

Technical Datasheet: Polyseal

7/2/2008 2:56:00 AM

When applied to newly placed Pre-Krete, Polyseal forms a hard moisture retaining film which retards evaporation of water, permitting better curing and higher strength. For use both indoors and outdoors and for structures.

Material Safety Datasheet: Pre-Krete C-17

7/2/2008 2:55:00 AM

Pocono Fabricators' C-17 Pre-Krete is a calcium oxide hydraulic cement designed to provide effective corrosion and/or abrasion resistance against various acids and chemicals commonly found in industry. Hypersensitive individuals may develop an allergic dermatitis.

Product Sheet: Pre-Krete C-17

7/2/2008 2:55:00 AM

Pocono Fabricators' C-17 Pre-Krete was developed in 1942. It is a calcium oxide hydraulic cement designed to provide effective corrosion and/or abrasion resistance against various acids and chemicals commonly found in industry. It is recommended that the specific application be discussed with the factory or an authorized Pre-Krete representative prior to the installation. This will ensure the system's ability to perform as expected. Pre-Krete C-17 is used to line new equipment and to repair and restore existing equipment.

Technical Datasheet: Pre-Krete C-17

7/2/2008 2:55:00 AM

White Paper: Surface Aeration Revisited

6/25/2008 4:37:00 AM

The intention of this paper is to have a critical review of the theory and practice of today's Waste Water Aeration Technology. WWTP aeration processes are designed to promote growth of aerobic microorganisms, which, in turn, reduce the biological demand of the wastewater. Submitted by Philadelphia Mixing Solutions

Brochure: PMSL Testing Facility

6/25/2008 4:32:00 AM

If you are looking for a facility to test your mixing equipment and process, Philadelphia Mixing Solutions has the largest, most fully-staffed, and continually operating lab facility in the world. Our mixing experts have over 200 years of collective mixer experience to ensure your application performance is handled correctly.

White Paper: The New Approach To Paper Chest Mixing

6/25/2008 4:21:00 AM

This paper discusses the rheology and scale-up issues that have created the demand for successful, continuous full-scale reactors with numerous mixing zones. The cost of the installation of a full scale mixer can potentially be returned in as little as one month of operation. Submitted by Philadelphia Mixing Solutions

Datasheet: Talon

6/25/2008 4:07:00 AM

Philadelphia Mixing Solutions, with its full scale "university grade" (up to 750,000 gallons) testing facility and process knowledge, Philadelphia Mixing Solutions provides efficient biological nutrient removal (BNR) that you can count on.

Datasheet: CounterFLow

6/25/2008 3:54:00 AM

Philadelphia Mixing Solutions' Counterflow Impeller offers a higher pumping rate than conventional impellers because it can efficiently operate at much higher impeller-to-tank diameter ratios. This is of greatest advantage with shear thinning fluids where stagnancy at the wall can be a problem. Conventional turbines require significantly greater power to produce flow at the walls. The CFD models below demonstrate this flow patter.

Datasheet: Raptor

6/25/2008 3:41:00 AM

The Raptor, PMSL's directional aerator is ideal for industrial or municipal lagoons and basins where aeration and mixing are required. The Raptor may be used in a floating or fixed mounted configuration and is also an excellent method to supplement aeration, mixing and velocity requirements.

Datasheet: Pre-Krete Formula C-17

4/30/2008 2:01:00 PM

Datasheet: Model 6081 Wireless Transmitter For pH And ORP

4/1/2008 12:46:00 PM

The Model 6081-P transmitter is ideal for monitoring applications, especially in hard-to-reach or cost prohibitive locations. Model 6081-P measures pH and ORP and is compatible with most Rosemount Analytical pH and ORP sensors

Brochure: "The Edge" Micro Size Cable-Free Noise Dosimeter

11/30/2007 10:05:00 AM

The Edge is a cable-free noise dosimeter that measures personal noise exposure. No longer is there a concern with cables interfering with the task at hand. The thin, lightweight, contoured shoulder mount instrument conforms to the worker's body for comfortable use while maintaining an upward orientation for the microphone

Product Brochure: Model 334 Charger: Labeler

10/23/2007 4:39:00 PM

Product Brochure: Model 334 Charger: Labeler

Achieving Sourcing Excellence

8/24/2007 2:05:00 PM

Learn how you can respond to challenging market conditions and add value to your organization by attaining sourcing excellence. Explore the stages of development, and see how you can create a three-year plan to achieve sourcing excellence.